Checking The Display - Atlas Copco GA 37 VSD Instruction Book

Air filter
Regularly check the service indicator. If the colored part of service indicator (VI) shows full out,
replace the air filter element. Reset the service indicator by pushing the knob in the extremity of
the indicator body.
Drains
Regularly check that condensate is discharged during operation. See section
system. The amount of condensate depends on environmental and working conditions.
6.5

Checking the display

Compressors with Elektronikon™ Graphic controller:
Check the display (2) regularly for readings and messages. The display normally shows the
compressor outlet pressure, while the status of the compressor is indicated by means of a
number of icons. Remedy the trouble if alarm LED (7) is lit or flashes, see section 'Icons used'.
The display (2) will show a service message if a service plan interval has been exceeded or if a
90
Position of the service indicator
Control panel of the Elektronikon™ Graphic controller
Instruction book
Condensate
API480496