Atlas Copco GA 15 Instruction Book page 37

Instruction book
Overview of the screens
Digital input
screens
<d. in>
<d. 1>
<d. 2>
<d. 3>
<d. 4>
<d. 5>
<d. 6>
<d. 7>
Parameter
screens
<P .1>
<P. 2>
<P. 3>
<P. 4>
<P. 5>
<P. 6>
<P. 7>
<P. 8>
<P. 9>
<P. 10>
<P. 11>
<P. 12>
<P. 13>
<P. 14>
API459842
Designation
Digital input status
Running hours (hrs or x 1000 hrs)
Motor starts (x 1 or x 1000)
Module hours (hrs or x 1000 hrs)
Loading hours (hrs or x 1000 hrs)
Load relay (x 1 or x 1000)
Service timer reading (hrs or x 1000 hrs)
Actual program version
Designation
Selection between local, remote or LAN
control
Setting a node ID for LAN control and the
channels for Mk 4 and Mk 5
Settings for IP, gateway and Subnet mask
Pressure band settings
Setting a pressure band selection
Modifying a service timer
Setting of unit for temperature
Setting of unit for pressure
Selection for function: Automatic restart
after voltage failure (active or not, only for
Atlas Copco)
Selection between Y-D or DOL starting
Setting of load delay time
Setting of minimum stop time
Setting a password
Remote pressure sensing
Related topic
See section Calling-up running hours
See section Calling up motor starts
See section Calling up module hours
See section Calling up loading hours
See section Calling up load relay
See section Calling up/resetting the service
timer
Related topic
See section Selection between Local
Remote and LAN control
See section Calling up/modifying CAN
address control
See section Calling up/modifying IP,
Gateway and Subnetmask
See section Calling up/modifying pressure
band settings
See section Modifying pressure band
selection
See section Calling up/modifying service
timer settings
See section Calling up/modifying unit of
temperature
See section Calling up/modifying unit of
pressure
See section Activating automatic restart
See section Selection between Y-D or DOL
starting
See section Calling up/modifying load
delay time
See section Calling up/Modifying minimum
stop time
See section Activating password protection
See section Activate Load/Unload remote
sensing
35