Drive Parameters - Curtis 1212 Manual

3 — PROGRAMMABLE PARAMETERS:
PARAMETER
Accel Max Speed
Accel Min Speed
Decel High Speed
Decel Low Speed
Rev Accel Max Speed
Rev Accel Min Speed
Rev Decel High Speed
Rev Decel Low Speed
Key Off Decel
12

Drive Parameters

DRIVE MENU
ALLOWABLE
RANGE
0.2–8.0 sec Sets the rate (in seconds) at which the speed command increases
when throttle is applied with the speed limit pot is in its maximum speed
position, and the vehicle is traveling forward. Larger values represent
slower response.
Note: Allowable range is restricted by the Accel Min Speed setting.
0.2–8.0 sec Sets the rate (in seconds) at which the speed command increases
when throttle is applied while the speed limit pot is in its minimum speed
position, and the vehicle is traveling forward. Larger values represent
slower response
Note: Allowable range is restricted by the Accel Max Speed setting.
0.2–8.0 sec Sets the rate (in seconds) that is used to slow down the vehicle when it
is traveling forward at high speed and throttle is reduced. Larger values
represent slower response.
Note: Allowable range is restricted by the Decel Low Speed setting.
0.2–8.0 sec Sets the rate (in seconds) that is used to slow down the vehicle when it
is traveling forward at low speed and throttle is reduced. Larger values
represent slower response.
Note: Allowable range is restricted by the Decel High Speed setting.
0.2–8.0 sec Sets the rate (in seconds) at which the speed command increases
when throttle is applied while the speed limit pot is in its maximum speed
position, and the vehicle is traveling in reverse. Larger values represent
slower response.
Note: Allowable range is restricted by Rev Accel Min Speed setting.
0.2–8.0 sec Sets the rate (in seconds) at which the speed command increases
when throttle is applied while the speed limit pot is in its minimum speed
position, and the vehicle is traveling in reverse. Larger values represent
slower response.
Note: Allowable range is restricted by Rev Accel Max Speed setting.
0.2–8.0 sec Sets the rate (in seconds) that is used to slow down the vehicle when it
is traveling in reverse at high speed and throttle is reduced. Larger values
represent slower response.
Note: Allowable range is restricted by Rev Decel Low Speed setting.
0.2–8.0 sec Sets the rate (in seconds) that is used to slow down the vehicle when it
is traveling in reverse at low speed and throttle is reduced. Larger values
represent slower response.
Note: Allowable range is restricted by Rev Decel High Speed setting.
0.2–4.0 sec Sets the rate (in seconds) that is used to slow down the vehicle at key-off
or in the event of a major fault.
DESCRIPTION
Curtis 1212 Manual