Device Information; System > System Settings - D-Link DGS-1210-12TS/ME User Manual

4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
Figure 4.12 –Function Tree

Device Information

The Device Information provides an overview of the switch, including essential information such as firmware
& hardware information, and IP address.
It also offers an overall status of common software features:
STP: Click Settings to link to Configuration > Spanning Tree > STP Bridge Global Settings. Default is
disabled.
Port Mirroring: Click Settings to link to Configuration > Port Mirroring. Default is disabled.
IGMP Snooping: Click Settings to link to Configuration > IGMP Snooping > IGMP Snooping. Default is
disabled.
DHCP Client: Click Settings to link to System > System Settings. Default is disabled.
Power Saving: Click Settings to link to System > Power Saving. Default is disabled.
SNMP Status: Click Settings to link to System > SNMP Settings > SNMP Global State. Default is enabled.
802.1X Status: Click Settings to link to Security > 802.1X > 802.1X Settings. Default is disabled.
Safeguard Engine: Click Settings to link to Security > Safeguard Engine. Default is enabled.
Jumbo Frame: Click Settings to link to Configuration > Jumbo Frame. Default is disabled.
Figure 4.13 – Device Information
System > System Settings
The System Setting allows the user to configure the IP address and the basic system information of the
Switch.
24