Rear Panel Description - D-Link DGS-1210-12TS/ME User Manual

1 Product Introduction
LED Per SFP
Link/Act
Port
LED Per 10G
SFP+ Port
Link/Act
(for DGS-1210-
28X/ME,
28XS/ME)

Rear Panel Description

The rear panel of the Switch contains an AC power connector. The AC power connector is a standard three-
pronged connector that supports the power cord. Plug-in the female connector of the provided power cord
into this socket, and the male side of the cord into a power outlet. The Switch automatically adjusts its power
setting to any supply voltage in the range from 100 to 240 VAC at 50 to 60 Hz. Connect the Kensington-
compatible security lock, at the rear of the switch, to a secure immovable device. Insert the lock into the
notch and turn the key to secure the lock.
The rear panel also includes an outlet for an optional external power supply and one RJ-45 console port.
When a power failure occurs, the optional external RPS will immediately and automatically assume the
power supply for the Switch.
DGS-1210-10/ME
DGS-1210-10P/ME
DGS-1210 series Metro Ethernet Managed Switch User Manual
Green
Amber
Off
Green
Amber
Off
Figure 1.15－ DGS-1210-10/ME Rear Panel
Figure 1.16－ DGS-1210-10P/ME Rear Panel
8
When there is a secure
Solid
1000Mbps Ethernet connection
Green
(or link) at any of the ports.
When there is reception or
Blinking transmission (i.e. Activity—Act)
Green of data occurring at a 1000Mbps
Ethernet connected port.
When there is a secure
Solid
100Mbps connection at the port.
Light
(For DGS-1210-28XS/ME only)
When there is reception or
Blinking transmission occurring at the
Amber port. (For DGS-1210-28XS/ME
only)
Solid
No link.
off
Solid When there is a secure 10Gbps
Light connection at the port.
When there is reception or
Blinking
transmission occurring at the
Green
port.
When there is a secure
Solid
1000Mbps connection at the
Light
port.
When there is reception or
Blinking
transmission occurring at the
Amber
port.
Solid
No link.
off