Poe > Poe Port Settings (Dgs-1210-10P/28P/28Mp/52P/52Mp/52Mpp/Me Only) - D-Link DGS-1210-12TS/ME User Manual

4 Configuration
- Burst Size: Specify the committed Burst Size of the packet. The range is from 0 to 1016 kbyte.
Rate Exceed: Specifies the action when the packet is in yellow color mode.
- Drop Packet: Drops the packet.
- Replace DSCP: Allow user to change the DSCP of the packet.
Click Apply to make the configurations take effect.
PoE > PoE Port Settings (DGS-1210-10P/28P/28MP/52P/52MP/52MPP/ME only)
DGS-1210-10P/28P/28MP/52P/52MP/52MPP/ME supports Power over Ethernet (PoE) as defined by the
IEEE specification.DGS-1210-10P/ME supplies power to PD device up to 30W, DGS-1210-28P/ME supplies
power to PD device up to 15.4W for port 5~24 and 30W for port 1~4, DGS-1210-28MP/ME supplies power to
PD device up to 30W for port 1~24, DGS-1210-52P/ME supplies power to PD device up to 15.4W for port
9~24 and 30W for port 1~8, DGS-1210-52MP/ME supplies power to PD device up to 15.4W for port 9~48
and 30W for port 1~8, and DGS-1210-52MPP/ME supplies power to PD device up 30W for port 1~48,
meeting IEEE802.3af standards and pre-802.3at standards.
DGS-1210-10P/28P/28MP/52P/52MP/52MPP/ME works with all D-Link 802.3af or 802.3at capable devices.
The Switch also works in PoE mode with all non-802.3af capable D-Link AP, IP Cam and IP phone
equipment via the PoE splitter DWL-P50.
IEEE 802.3at defined that the PSE provides power according to the following classification:
The PoE port table will display the PoE status including, Port Enable, Power Limit, Power (W), Voltage (V),
Current (mA), Classification, Port Status. You can select From Port / To Port to control the PoE functions of
a port. DGS-1210-10P/28P/28MP/52P/52MP/52MPP/ME will auto disable the ports if port current is over
375mA in 802.3af mode or 625mA in pre-802.3at mode.
Note: For DGS-1210-10P/ME, the port 1 ~ port 8 are compliance
with 802.3at. The total PoE budget is 78 Watts.
For DGS-1210-28P/ME, the port 1 ~ port 4 are compliance with
802.3at, and the port 5 ~ port 24 are compliance with 802.3af. The
total PoE budget is 193 Watts.
For DGS-1210-28MP/ME, the port 1 ~ port 24 are compliance with
802.3at and 802.3af. The total PoE budget is 370 Watts.
For DGS-1210-52P/ME, the port 1 ~ port 8 are compliance with
802.3at, and the port 9 ~ port 24 are compliance with 802.3af. The
total PoE budget is 193 Watts.
For DGS-1210-52MP/ME, the port 1 ~ port 8 are compliance with
802.3at, and the port 9 ~ port 48 are compliance with 802.3af. The
total PoE budget is 370 Watts.
For DGS-1210-52MPP/ME, the port 1 ~ port 48 are compliance with
802.3at. The total PoE budget is 740 Watts.
DGS-1210 series Metro Ethernet Managed Switch User Manual
Class Usage Output power limit by PSE
0 Default 15.4W
1 Optional 4.0W
2 Optional 7.0W
3 Optional 15.4W
4 Reserved 30W
Note: The PoE Status information of Power
current, Power Voltage, and Current is the power
usage information of the connected PD; please
"Refresh" to renew the information.
136