Faults With Fault Message - Touch Control; Troubleshooting; Procedure For Fault Messages - Froling SP Dual compact Operating Instructions Manual

Dual fuel boiler

Hide thumbs Also See for SP Dual compact:

Table of Contents

Faults with fault message - touch control

5.5 Faults with fault message - touch control

5.5.1 Troubleshooting

Operating Instructions SP Dual compact | B1500016_en

The term "fault" is a collective term for warnings, errors and alarms. The boiler reacts

differently to the three types of message:

WARNING

In case of warnings the status LED flashes orange and the boiler initially

continues controlled operation.

ERROR

When there is an error, the status LED flashes red, the boiler follows the

shutdown procedure and remains in "Fault / Off" status until the problem

is resolved.

ALARM

An alarm triggers a system emergency stop. The status LED flashes red,

the boiler switches off immediately and the heating circuit controller and

pumps remain active.

A window with the corresponding fault text will also appear. Pressing the Cancel icon

takes you back to the basic display. If the quick select icon and the warning triangle

flash alternately, there is still a fault. The "Error display" button will now appear in the

quick menu.

If you open the window with the respective fault text, the right arrow will take you to

possible causes of the fault.

Table of Contents

Do you have a question about the SP Dual compact and is the answer not in the manual?

S1 turbo