Faults With Fault Message - Key Control; Troubleshooting; Procedure For Fault Messages - Froling SP Dual compact Operating Instructions Manual

5

5.4 Faults with fault message - key control

5.4.1 Troubleshooting

Procedure for fault messages

52
The term "fault" is a collective term for warnings, errors and alarms. The boiler reacts
differently to the three types of message:
WARNING In case of warnings the status LED flashes orange and the boiler initially
continues controlled operation.
ERROR In case of errors, the status LED flashes red, the boiler follows shutdown
procedure and remains in operating status "Fault/Off ", until the error is
resolved.
After troubleshooting, the boiler switches back to the operating status
"Fault/Off".
ALARM An alarm triggers a system emergency stop. The status LED flashes red,
the boiler switches off immediately and the heating circuit controller and
pumps remain active.
When a fault occurs:
▪ The status LED flashes red or orange
▪ The display shows all the current fault messages and the warning symbol in the
status line
Fröling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
Troubleshooting
Faults with fault message - key control
After pressing the enter key the
fault is acknowledged.
The warning symbol in the status
line shows that the fault is still
pending.
Pressing the info key displays the
fault as info text with the related
fault number.
The warning symbol only
switches off when the fault has
been resolved!
After pressing the enter key an
info text on the cause of the fault
is displayed. Pressing the enter
key again displays instructions for
resolving the fault.
If a fault has various causes or
the cause can be resolved in
various ways, you can scroll
through with the navigation keys.