ACME MH-575S User Manual page 12

F. If The tilt belt is broken
1. Turn off the main power.
2. Unscrew all the screws (A) and open the right arm cover (B).
3. Unscrew the screws (C), the screws (D) and screws (E) that fix the bridge.
4. Change a new belt (F). Please adjust the tension of the belt properly. Note: do not fix
belt too tight as it is easy to rupture.
5. Reverse the procedures from point 3 to 2.
C
C
F
D
E
C
22-
Pay attention to the belt tension when install the belt.
Please refer to the photos below:
A
B
F
G
Photo 1
Adjust belt tension through loose the screw
Photo 2
23-