Table of Contents
Advertisement
Blackout Mode
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
blackout) or
(no blackout) mode. Once the mode has been selected, press the
ENTER button to setup or automatically return to the main functions without any change
after 8 seconds. To go back to the functions without any change press the MENU button
again.
Sound Mode
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
On) or
(Sound Off) mode. Once the mode has been selected, press the ENTER
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the MENU button again.
Sound Sense
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to change the value of sound
sense from 0~255. Once the mode has been selected, press the ENTER button to setup or
automatically return to the main functions without any change after 8 seconds. To go back to
the functions without any change press the MENU button again.
Pan Inversion
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
or
(pan inversion) mode. Once the mode has been selected, press the ENTER
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the MENU button again.
Tilt Inversion
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
or
(tilt inversion) mode. Once the mode has been selected, press the ENTER
is shown on the display. Pressing ENTER
is shown on the display. Pressing ENTER
is shown on the display. Pressing ENTER
is shown on the display. Pressing ENTER
is shown on the display. Pressing ENTER
12-
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the MENU button again.
Led Display
(yes
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(Led on) or
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the MENU button again.
Display Inversion
It is good for you to install the unit on the floor or under ceiling. Press the MENU button up to
(Sound
when the
(display inversion), It will automatically store after 8 seconds. Or press the ENTER
button again return to the mode
press the MENU button.
Press the MENU button up to when the
button, the unit will focus on tilt 90°, and then the unit will focus on tilt 0°, pan 0°, pan 90°,
pan 180°, pan 270° in every pressing ENTER button. To go back to the functions press the
MENU button again.
Self-Test
(normal)
Press the MENU button up to when the
ENTER button and the unit will run self-test by built-in program. To go back to the functions
press the MENU button again.
Press the MENU button up to when the
(normal)
ENTER button and the display will show the number of working hours of the unit. To go back
to the functions press the MENU button again.
(Led off) mode. Once the mode has been selected, press the ENTER
is blinking on the display. Use the ENTER button to change to the mode
(display normal). To go back to the functions
Display normal mode for the fixture putting on the floor.
Display inversion mode for the fixture fixing under ceiling.
Focus Adjust
is blinking on the display. Pressing ENTER
Fixture Hours
13-
is showing on the display. Pressing
is blinking on the display. Pressing
is blinking on the display. Pressing
Hide quick links:
Advertisement
Table of Contents
