Installing The 2.5 Inch Hard Drive Backplane (Rear) - Dell EMC PowerEdge R640 Installation And Service Manual

Steps
1 Using Phillips #2 screwdriver, remove the screws that secure the hard drive backplane to the rear hard drive cage.
2 Disengage the backplane from the hooks on the rear hard drive cage, and remove it from the rear hard drive cage.
Figure 82. Removing the 2.5 inch hard drive back plane (rear)
Figure 83. 2 X 2.5 rear hard drive backplane
1 power connector
3 SAS cable connector
Next steps
Install the rear 2.5 inch hard drive backplane.
Related links
Removing the hard drive from the hard drive carrier
Removing the rear hard drive cage

Installing the 2.5 inch hard drive backplane (rear)

Installing the 2.5 inch hard drive backplane (rear)
Prerequisites
Follow the safety guidelines listed in
128 Dell EMC PowerEdge R640 Installation and Service Manual
Installing and removing system components
Safety instructions.
2 backplane signal connector
4 NVMe cable connector