Installing An Expansion Card Riser - Dell EMC PowerEdge R640 Installation And Service Manual

Figure 47. Removing the expansion riser 2B
Next steps
Install the expansion card riser.
Related links

Installing an expansion card riser

Installing an expansion card riser
Prerequisites
1 Follow the safety guidelines listed in
2 Before installing the expansion card riser 2A, install an expansion card into the riser, if applicable.
Steps
1 If removed, install the expansion cards into the expansion card riser.
2 Holding the touch points, align the expansion card riser with the connector and the riser guide pin on the system board.
NOTE: While installing riser 1 B, press the tabs and hold the touch point to align the expansion card riser and the riser
guide pin on the system board.
3 Lower the expansion card riser into place until the expansion card riser connector is fully seated in the connector.
102 Dell EMC PowerEdge R640 Installation and Service Manual
Installing and removing system components
Safety instructions.