Right Control Panel View - Dell EMC PowerEdge R640 Installation And Service Manual

iDRAC Quick Sync 2 indicator
code
Blinks white rapidly
Blinks white slowly
Blinks white five times rapidly and
then turns off
Solid amber
Blinking amber

Right control panel view

Figure 8. Right control panel
Table 6. Right control panel
Item
1
14 Dell EMC PowerEdge R640 Installation and Service Manual
PowerEdge R640 system overview
Condition
Indicates data transfer activity.
Indicates that firmware update is in
progress.
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Indicates that the system is in fail-safe
mode.
Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Indicator or button
Power button
Corrective action
If the indicator continues to blink indefinitely, see the
Getting help section.
If the indicator continues to blink indefinitely, see the
Getting help section.
Check if iDRAC Quick Sync 2 feature is configured to
be disabled by iDRAC. If the problem persists, see the
Getting help section. For more information, see
Integrated Dell Remote Access Controller User's
Guide at Dell.com/idracmanuals or Dell
OpenManage Server Administrator User's Guide at
Dell.com/openmanagemanuals.
Restart the system. If the problem persists, see the
Getting help section.
Restart the system. If the problem persists, see the
Getting help section.
Icon Description
Indicates if the system is turned
on or off. Press the power
button to manually turn on or off
the system.