Installing The Air Shroud - Dell EMC PowerEdge R640 Installation And Service Manual

Steps
Hold the air shroud at both ends and lift it away from the system.
Figure 28. Removing the air shroud
Next steps
If applicable, install the air shroud.

Installing the air shroud

Prerequisites
1 Follow the safety guidelines listed in
2 If applicable, route the cables inside the system along the system wall and secure the cables by using the cable latch.
Steps
1 Align the tabs on the air shroud with the slots on the system.
2 Lower the air shroud into the system until it is firmly seated.
When firmly seated, the memory socket numbers marked on the air shroud align with the respective memory sockets.
76 Dell EMC PowerEdge R640 Installation and Service Manual
Installing and removing system components
Safety instructions.