Dell EMC PowerEdge R640 Installation And Service Manual page 129

Hide thumbs Also See for EMC PowerEdge R640:
Table of Contents

Advertisement

Steps
1
Use the hooks on the rear hard drive cage as guides to align the hard drive backplane.
2
Lower the backplane into the system until it is firmly seated.
3
Using Phillips #2 screwdriver, replace the screws to secure the backplane to the rear hard drive cage.
Figure 84. Installing the 2.5 inch hard drive backplane (rear)
Next steps
1
Install the rear hard drive cage.
2
Install all the hard drives.
3
Connect all the cables to the backplane.
4
Follow the procedure listed in
Related links
Installing the rear hard drive cage
Installing a hard drive into the hard drive carrier
After working inside your
system.
Dell EMC PowerEdge R640 Installation and Service Manual
Installing and removing system components
129

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents