Installing The Optional Idsdm/Vflash Card - Dell EMC PowerEdge R640 Installation And Service Manual

Figure 63. Removing the optional IDSDM/vFlash card
Next steps
Install the optional IDSDM/vFlash card.
Related links
Removing the rear hard drive cage
Removing the micro SD card

Installing the optional IDSDM/vFlash card

Installing the optional IDSDM/vFlash card
Prerequisites
Follow the safety guidelines listed in
Steps
1 Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash, see the System board jumpers and connectors section.
2 Align IDSDM/vFlash card with the connector on the system board.
3 Push IDSDM/vFlash card until it is firmly seated on the system board.
Safety instructions.
Dell EMC PowerEdge R640 Installation and Service Manual
Installing and removing system components
113