Installing A Cooling Fan - Dell EMC PowerEdge R640 Installation And Service Manual

Steps
1 Holding the touch points on the cooling fan, lift the fan to disconnect the connector on the fan from the connector on the system
board.
2 Lift the fan out of the system.
Figure 30. Removing the cooling fan
Next steps
If applicable, install the cooling fan.
Related links

Installing a cooling fan

Installing a cooling fan
The procedure for installing standard and high performance fans is identical.
Prerequisites
WARNING: Opening or removing the system cover when the system is on may expose you to a risk of electric shock. Exercise
utmost care while removing or installing cooling fans.
CAUTION: The cooling fans are hot swappable. To maintain proper cooling while the system is on, replace only one fan at a time.
Follow the safety guidelines listed in
Steps
1 Holding the touch points on the cooling fan, align the connector on the cooling fan with the connector on the system board.
2 Push the cooling fan, by pressing on the touch point, till the fan is firmly seated on the connector.
78 Dell EMC PowerEdge R640 Installation and Service Manual
Installing and removing system components
Safety instructions.