Alarm And Event Handling - ABB ZEE600 Operation Manual

2NGA000149 A
3.10
ABB ZEE600
Operation Manual
GUID-EF72115B-0963-4BB5-9771-2373A6E7A86F V1 EN
Figure 31: Accessing the Web HMI

Alarm and event handling

Alarm administration informs the operator of abnormal situations or faults, such as
limit value violations and protection trips, in the electrical power network or
equipment.
• The alarm status line is always shown in the foreground in zenon Runtime and
typically it can be used to display the most recent or oldest unacknowledged
alarm.
• Alarm message list administers alarms in a list in zenon Runtime.
• Displays alarms and their causes in an unfiltered or filtered list
• Enables localization of the alarm cause
• Enables alarm acknowledgement
• Enables alarm deletion
• Enables alarm printing and saving
For quick error diagnosis and traceability, there are three different operating areas in
the visualization.
• Navigation alarm list
• Active and historical alarm lists
• Chronological event list
Section 3
Operating the system
37