HPE ProLiant ML110 Gen9 Maintenance And Service Manual page 53

Open each of the processor locking levers in the order indicated, and then open the processor
13.
retaining bracket.
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY
DAMAGED. To avoid damage to the system board, do not touch the processor or the
processor socket contacts.
Remove the processor from the processor retaining bracket.
14.
CAUTION: To avoid damage to the system board:
• Do not touch the processor socket contacts.
• Always install the processor socket cover after removing the processor from the socket.
• Do not tilt or slide the processor when lowering the processor into the socket.
CAUTION: Removal of the processor or heatsink renders the thermal layer between the
processor and heatsink useless. Clean the component with the provided alcohol swab, then
add thermal grease.
Place the processor on a static-dissipating work surface or inside an anti-static bag.
15.
Removal and replacement procedures 53