Maintenance and Troubleshooting
Troubleshooting
Alarm Messages
With the exception of loss of power alarms (on main chassis and expansion unit) all
alarms are module alarms.
Table A-1
lists each module with corresponding alarm
descriptions, alarm levels, status messages, and corrective action. Since a "no fault"
alarm requires no action, the "Corrective Action" category applies only to fault
messages requiring user intervention.
Event Messages
Table A-6
lists event messages categorized by module. Each section lists status
messages associated with each module and an event description of each message.
Figure 5-1
shows the structure of a typical Alarm and Event report status messages.
Figure 5-1.
Alarm and Event Status Breakdown
Table 5-3
outlines troubleshooting procedures for the SSU-2000.
12713020-002-2 Revision D – April 2004
SSU-2000 User's Guide 117