I/O Adapter Panels For Input And Output Modules - Symmetricom SSU-2000 User Manual

Product Overview
Input and Output Adapter Panels
There are four adapter panels available for use with the SSU-2000 Input and Output
modules including:
Input I/O adapter for 3-port Input modules (DS1 or E1) – one adapter panel is
required for each 3-port Input module used in the system.
Input I/O adapter for 1-port Input modules (DS1 or E1) – one adapter panel
serves up to four 1-port Input modules.
Output I/O adapter for Output modules (75 ohm Balun Outputs) – one adapter
panel accommodates one output module (non-redundant) or one pair of redundant
modules.
Output I/O adapter for Output modules (D9 outputs) – one adapter panel
accommodates one Output module (non-redundant) or one pair of redundant
modules.
These adapter panels are shown in
Chapter 7, Input Module Reference
Data.
Figure 1-11. I/O Adapter Panels for Input and Output Modules
48 SSU-2000 User's Guide
Figure 1-11
Data, and
I/O Adapter for 3-Port Input Module
I/O Adapter for 1-Port Input Module
75 Ohm Balun I/O Adapter for Output Module
DE9 I/O Adapter for Output Module
and described in greater detail in
Chapter 8, Output Module Reference
12713020-002-2 Revision D – April 2004