The ports include:
Port A and Port B – Tied to external connectors on the rear panel of the
SSU-2000 Main chassis.
One local port – Tied to the connector on the front panel of the Communications
module.
Backplane communications port – Used to communicate with other modules in
the system.
Ethernet Port
The Communications module implements one Ethernet port (10-BASE-T) that is
routed to an RJ-45 connector on the rear panel of the main chassis. For more
information on Ethernet settings, see
12713020-002-2 Revision D – April 2004
Communicating by
Ethernet, on page 90.
Clock Module Reference Data
Communications Module
SSU-2000 User's Guide 141