Ssu-2000 Rear Panel; I/O Module Slot To I/O Connector Relationship - Symmetricom SSU-2000 User Manual

All I/O connections are made through the nine 50-Pin Micro-D female connectors,
J10 through J18. Each connector is associated with a specific chassis slot.
2-1 lists the relationship between the I/O slot and the rear panel connector.
Connectors J10 through J18 are labeled I/O-1 through I/O-9. The signal
connections on these I/O connectors are set up in differential pairs as Tip and Ring
connections.
Figure 2-4.

SSU-2000 Rear Panel

Table 2-1. I/O Module Slot to I/O Connector Relationship
Label
(Name)
I/O-1
I/O-2
I/O-3
I/O-4
I/O-5
I/O-6
I/O-7
I/O-8
I/O-9
12713020-002-2 Revision D – April 2004
Chassis Slot I/O Connector
A3 J10
A4 J11
A5 J12
A6 J13
A7 J14
A8 J15
A9 J16
A10 J17
A11 J18
Installing the SSU-2000
Making Connections
Table
SSU-2000 User's Guide 67