Balun Output I/O Adapter Panel For Output Module; Buffer Module Led Indicators - Symmetricom SSU-2000 User Manual

Table 8-19. Buffer Module LED Indicators
Indicator
POWER Green
STATUS Green/Amber
-48V Power A Green/Amber
-48V Power B Green/Amber
Output Adapter Panels
Balun Output Adapter Panel
Symmetricom offers three Balun Output Adapter panels for use with 2048 kHz and
E1 Output modules. One adapter panel is required for each Output module in the
shelf. You need one Output cable (see
of available cables) to connect the Adapter panel to the shelf.
The Balun Output Adapter panel (part number 22013068-001-0) uses BNC
connectors.
The Balun Output I/O Adapter panel (part number 22013068-002-0) uses Siemens
1.6/5.6 mm connectors.
The Balun Output I/O Adapter panel (part number 22013068-003-0) uses Siemens
1.0/2.3 mm connectors.
Figure 8-26. Balun Output I/O Adapter Panel for Output Module
12713020-002-2 Revision D – April 2004
Color
On = Receiving +5 vDC power
Off = Loss of +5 vDC power
On (Green) = Normal mode of operation; no faults
Blinking Amber = Downloading firmware
On (Amber) = Unknown status, or a fault has been detected
On (Green) = Receiving input power from Power A
On (Amber) = Power connections reversed
Off = Loss of input Power A
On (Green) = Receiving input power from Power B
On (Amber) = Power connections reversed
Off = Loss of input Power B
Figure 8-26 shows an I/O Adapter with Balun outputs.
Description
Adapter Accessories, on page 221, for a list
Output Module Reference Data
Output Adapter Panels
SSU-2000 User's Guide 219