Overview; Hardware & Software Requirements; Toolbar Summary - GE 269Plus Instruction Manual

8 269PC SOFTWARE
269 PLUS INSTRUCTION MANUAL 8 269PC SOFTWARE
The 269PC software, provided with every 269Plus relay, allows easy access to all relay setpoints and actual
values via a personal computer running Windows
or COM2. With 269PC, the user can:
• Program/modify setpoints
• Load/save setpoint files from/to disk
• Read actual values
• Monitor status
• Plot/print/view trending graphs of selected actual values
• Get help on any topic
The regular 269 relay does not support communications. Therefore, the 269PC software can only be used with
a 269Plus relay. The 269PC software can be used "stand-alone", without a 269Plus relay, to create or edit
269Plus setpoint files.
The configuration listed is for both a minimum configured and an optimal configured system. Running on a min-
imum configuration causes the performance of the PC program to slow down.
• Processor: minimum 486, Pentium recommended
• Memory: minimum 4 MB, 16 MB or higher recommended, minimum 540 K of conventional memory
• Hard Drive: 20 MB free space required before installation of software
WINDOWS 3.1/3.11 CONSIDERATIONS:
• Installation of SHARE.EXE required.
• Do not run other applications (spreadsheet or word processor) before running the software to eliminate
any problems because of low memory.
GE Power Management
Courtesy of NationalSwitchgear.com
®
3.1/95 or higher and one of the PC's RS232 ports: COM1
8.2 HARDWARE & SOFTWARE REQUIREMENTS
269Plus Motor Management Relay

8.3 TOOLBAR SUMMARY

Opens the Help window
Opens the Popup Currents window
Hang up
Modem Dial
Sets the communications parameters
Sends the current file to the printer
Saves the current file to disk
Open an existing file
Open a new file

OVERVIEW

8.1 OVERVIEW
8
8-
1