Suspensions
The following operation should be considered
valid for the Factory version only.
•
Place the brake calliper together with
its flange and tighten the fixing screws.
•
Remove the front service stand.
•
Remove the rear service stand.
•
Operating the brake lever, press the handlebar repeatedly to make the fork go fully down.
In this way the fork stems will be correctly adjusted.
•
Place the vehicle on the service stand.
•
Tighten the wheel pin clamp screws from both sides.
•
Place the fork reinforcing plate and
tighten the two fixing screws.
•
Place the rear half-mudguard and
tighten the two fixing screws.
SUSP - 202
PEGASO 650 STRADA - TRAIL - FACTORY