Engine
Generator side
Removing the flywheel cover
•
Remove the starter motor.
•
Undo and remove the four screws.
•
Remove the cover together with the
torque limiter.
•
Collect the centring dowel.
•
Loosen the nine screws operating di-
agonally.
•
Mark the screws with different lengths.
•
Remove the flywheel cover together
with the gasket, the starter motor neu-
tral gear, the four dowels and the two
O-rings.
See also
ENG - 104
PEGASO 650 STRADA - TRAIL - FACTORY