Domain Name Service; Configuring General Dns Service Parameters; Configuring A List Of Domain Names - Digisol DG-GS4528SE Management Manual

| IP Services
C 17
HAPTER

Domain Name Service

C L
ONFIGURING A IST
D N
OF OMAIN AMES
P
ARAMETERS
These parameters are displayed:
Domain Lookup – Enables DNS host name-to-address translation.
u
(Default: Disabled)
Default Domain Name – Defines the default domain name appended
u
to incomplete host names. Do not include the initial dot that separates
the host name from the domain name.
(Range: 1-127 alphanumeric characters)
W I
EB NTERFACE
To configure general settings for DNS:
Click IP Service, DNS.
1.
Select Configure Global from the Action list.
2.
Enable domain lookup, and set the default domain name.
3.
Click Apply.
4.
Figure 380: Configuring General Settings for DNS
Use the IP Service > DNS - General (Add Domain Name) page to configure
a list of domain names to be tried in sequential order.
CLI R
EFERENCES
"ip domain-list" on page 1329
u
"show dns" on page 1335
u
C U
OMMAND SAGE
Use this page to define a list of domain names that can be appended to
u
incomplete host names (i.e., host names passed from a client that are
not formatted with dotted notation).
If there is no domain list, the default domain name is used (see
u
"Configuring General DNS Service Parameters" on page
a domain list, the system will search it for a corresponding entry. If
none is found, it will use the default domain name.
When an incomplete host name is received by the DNS service on this
u
switch and a domain name list has been specified, the switch will work
– 628 –
627). If there is