Confirming Alarm Feature Status And Settings; Viewing The Alarm Log - Panasonic VL-MN1000 Installation And Operating Instructions Manual

– "Exit Delay": When you set the arm mode to
"Out", the exit delay can give you time to leave the
house before the alarm features are enabled.
Available only when "Timing" is set to "Delay
Alarm".
6.5 Confirming alarm feature
status and settings
1
From the home screen, tap "Alarm".
2
Tap "Alarm Status" on the left side of the screen.
R The status and settings for each alarm feature are
displayed.
3
When finished, tap

6.6 Viewing the alarm log

The room monitor logs information when alarm features
are triggered and saves it in the alarm log.
Follow this procedure to view the alarm log.
1
From the home screen, tap "Alarm".
2
Tap "Alarm Log" on the left side of the screen.
3
Browse the alarm log as needed.
R is displayed next to each new item, and
disappears when you tap the item.
4
When finished, tap
Note:
R Door bell and urgency button events are not saved in
the alarm log.
Features available while viewing the alarm log
– "Delete": Deletes the selected item.
– "Delete All": Deletes all items.
Limitations
250 items can be saved in the alarm log. Subsequent
items will overwrite the oldest items.
6. Alarm features
.
.
21