Installing The Room Monitor - Panasonic VL-MN1000 Installation And Operating Instructions Manual

12. Installation

12.7 Installing the room monitor

Required items
– Mounting bracket (included)
– Screws (included)
– LAN cable (user supplied)
See 12.10 Wire and cable specifications
(Page 38) for specifications.
Optional items
– Flush mount box (VL-VN1790; sold separately)
Used to mount the room monitor flush against the
wall.
– Screws (included with flush mount box)
– 12-pin terminal cable (included)
Used to connect external devices to the room
monitor.
– External devices (user supplied)
– Wires that connect the external devices to the 12-pin
terminal cable (user supplied)
See 12.10 Wire and cable specifications
(Page 38) for specifications.
Installation location
R Do not install the product in the following locations.
There may be a risk of malfunction or communication
disturbances.
– Places where vibration, impact, or echoing
occurs.
– Places near a high concentration of dust,
hydrogen sulphide, ammonia, sulphur, or noxious
fumes.
– Places where there is excessive smoke, dust,
and high temperature.
– Places exposed to direct sunlight.
R Install the product away from electronic appliances
such as TVs, radios, personal computers, air
conditioners, boiler control panels with intercom,
home security equipment, wireless devices, or digital
cordless phones.
R Install the room monitor at least 5 m away from the
door station.
R Install the room monitor so that the centre of the
display is at eye level.
34
R To prevent malfunction and sound cutting out, leave
at least 20 cm of space above, below, and on the
sides of the room monitor.
20 cm
R Install the room monitor (including the mounting
bracket or the flush mount box) on a flat, vertical wall.
20 cm
20 cm
20 cm