Preparation; Device Diagrams - Panasonic VL-MN1000 Installation And Operating Instructions Manual

3. Preparation

3.1 Device diagrams

Front view
A
B
Rear view
I
J
K
Display
The display turns on automatically when there is
activity, such as when you are receiving a call. You
can also turn the display on manually by tapping it
when it is off.
The display turns off after a while if there is no activity.
Speaker
Microphone
Call centre button (M
Allows you to call an on-site phone, such as the
facility staff office, common area phone, etc.
Home button (M N)
Displays the home screen.
Talk button (M N)
Allows you to answer the current call or start talking
while monitoring.
Monitor button (M
Allows you to monitor images from a camera.
Play button (M N)
Allows you to display messages and missed calls.
8
N)
N)
This button flashes on the "main" room monitor when
there are new text messages, voice messages, video
messages, or missed calls. It does not flash on a
"sub" room monitor.
Terminal connector
C
D
Used to connect external devices (user supplied) to
the room monitor.
E
DC IN connector
F
Used to connect the room monitor to a power supply
unit (sold separately) when no PoE power supply is
G
available.
H
LAN connector
Used to connect the room monitor to the network.