Table of Contents
Advertisement
Model Name
Model No.
Thank you for purchasing a Panasonic product.
Please read these Operating Instructions before using the unit and save for future reference.
Attached Installation Guide
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
© Panasonic System Networks Co., Ltd. 2010
Operating Instructions
Video Intercom System
VL-SV30BX
Including: VL-MV30BX
VL-V566BX
VL-MV30BX
Main Monitor
VL-MV30BX
VL-V566BX
PNQX3052ZA
SV1110MT0
Advertisement
Table of Contents
Related Manuals for Panasonic VL-MV30BX
Summary of Contents for Panasonic VL-MV30BX
-
Page 1: Operating Instructions
Including: VL-MV30BX VL-V566BX VL-MV30BX VL-V566BX Thank you for purchasing a Panasonic product. Please read these Operating Instructions before using the unit and save for future reference. Attached Installation Guide 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan © Panasonic System Networks Co., Ltd. 2010... -
Page 2: Table Of Contents
Monitoring the outside (Door station monitor) ........13 Product names used in these Operating Instructions These Operating Instructions are for both the VL-SV30BX and VL-MV30BX. For plain explanation, the product names used in these Operating Instructions are described as follows. VL-SV30BX... -
Page 3: Introduction
(VL-V566BX or VL-GC005BX). Compatible Panasonic PBXs This unit can be used with Panasonic PBXs (page 25). Please consult your dealer for compatible PBX information. This unit is compatible with the following Panasonic PBXs*... -
Page 4: Important Information
Important Information For your safety To prevent severe injury and loss of life/property, read this section carefully before using the unit to ensure proper and safe operation of your unit. WARNING Power connection LUse only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. -
Page 5: Important Safety Instructions
Important Information Important safety instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fi re, electric shock, or personal injury. 1. Do not use this unit near water. For example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. -
Page 6: Preparation
Preparation Location of controls Main monitor station A Microphone LDo not cover when you talk. B Monitor display (page 7) C {MENU} button LPress to change the function settings (page 21). CDEF D {MONITOR} button LPress to monitor the sound and image taken by the door station (page 13). - Page 7 Preparation Monitor display The following display is an example for description purposes, and it may differ from the actual display. LThe monitor display is turned off during standby. A Indicates which door station is calling, monitoring, or in a call. Also indicates which door station took the image while viewing it.
-
Page 8: Door Station
Preparation Door station A Lens cover B Camera LWhen a visitor presses the call button, the camera on the door station will turn on and an image of the visitor will be shown on the monitor display of the main monitor station. C {CALL} button and indicator LThe indicator is lighted with a red LED while the power is on. -
Page 9: Setting The Date And Time
Preparation Setting the date and time This unit has a recording function. The date and time will not be recorded when recording unless they are set. You can set the date and time using the main monitor station. {MONITOR} {PLAY} {DOOR KEY} {MENU} {TALK/OFF}... -
Page 10: Doorphone
Doorphone Answering a call When you receive a call from a door station, the main monitor station rings. You can monitor the visitor on the monitor display before answering a call. Microphone {MONITOR} {PLAY} {DOOR KEY} {MENU} {TALK/OFF} When a ringer tone is heard, press {TALK/OFF}. appears on the display. -
Page 11: Features During A Call Or While Monitoring
Doorphone Features during a call or while monitoring Adjusting the display brightness Adjusting the volume of your voice heard at the door station Press {MENU}, then select “BRIGHTNESS” by You can adjust the volume of your voice heard at the pressing {MENU} ( SELECT). -
Page 12: When Receiving Another Call During A Call Or While Monitoring
Doorphone When receiving another call during a call or while monitoring Door station 1 Main monitor station During a call While monitoring Door station 2 The ringer tone is heard, and the display indication (optional) notifi es you which door station is calling. Calling door station (Example: Door station 2) {TALK/OFF}... -
Page 13: Monitoring The Outside (Door Station Monitor)
Doorphone Monitoring the outside (Door station monitor) You can monitor the sound and image taken by the door station. LIf an optional lobby station is connected to the main monitor station (page 3), you cannot monitor outside where the lobby station is located. {MONITOR} {MENU} {TALK/OFF}... -
Page 14: Recording
Recording Recording an image The main monitor station can record (save) images from up to 30 calls (or monitoring to the door station). Auto recording After about 2 seconds when you receive a call from the door station, an image is automatically recorded. LIf you do not answer a call, the image for the call is recorded, and the main monitor station notifi... -
Page 15: Manual Recording
Recording Manual recording You can record an image anytime you are receiving a call, during a conversation, or while monitoring. {PLAY} When an image is shown on the display, press {PLAY} ( REC). Appears while recording an image. Disappears when recording ends. Note: LManually recorded images will be treated as viewed images. -
Page 16: Viewing Recorded Images
Recording Viewing recorded images You can view recorded images. When the PLAY indicator on the main monitor station is fl ashing, there is an image that has not been viewed yet. {MONITOR} {PLAY} {DOOR KEY} {MENU} {TALK/OFF} The PLAY indicator fl ashes. The indicator light goes off when the {PLAY} button is pressed. - Page 17 Recording How to view recorded images/Features while viewing recorded images Indicates that the image is unviewed. Recording number Recording date and time Set the date and time beforehand (page 9). UNPLAYED 5 16 JAN 20:00 (See “Note” below.) MENU SKIP BACK Returns to “PLAY MENU”.
-
Page 18: Programming
Programming Adjusting the ringer volume You can adjust the ringer volume heard when receiving calls from the door station by using the main monitor station during standby. (3 levels and “OFF” are available.) {MONITOR} {PLAY} {MENU} {TALK/OFF} Press {MENU}, then select “RING/ANSWERING SETTINGS” FUNCTION SETTINGS by pressing {MENU} ( SELECT). -
Page 19: Changing The Ringer Tone
Programming Changing the ringer tone You can change the ringer tone that is heard when receiving calls from the door station by using the main monitor station. {MONITOR} {MENU} {TALK/OFF} Press {MENU}, then select “RING/ANSWERING SETTINGS” FUNCTION SETTINGS by pressing {MENU} ( SELECT). TIME AND DATE SETTINGS RING/ANSWERING SETTINGS RECORDING/PLAY SETTINGS... -
Page 20: Setting {Door Key} Button
Programming Setting {DOOR KEY} button When a separate door opener is connected to the main monitor station, you can open the door using the main monitor station. You can also select how long the door remains open. If you do not use the door opener, select “NOT CONNECTED”. -
Page 21: Changing The Function Settings (Function List)
Programming Changing the function settings (Function list) How to change the function settings Press {MENU}, then select the desired item by pressing {MENU} ( SELECT). Press {MONITOR} (OK), then select the desired item by pressing {MENU} ( SELECT). {MONITOR} Press {MONITOR} (OK), then select the desired {MENU} setting by pressing {MENU} ( SELECT). - Page 22 Programming How to change the function settings Press {MENU}, then select the desired item by pressing {MENU} ( SELECT). Press {MONITOR} (OK), then select the desired item by pressing {MENU} ( SELECT). {MONITOR} Press {MONITOR} (OK), then select the desired {MENU} setting by pressing {MENU} ( SELECT).
- Page 23 Programming Item (function) Setting RECORDING/PLAY SETTINGS DOOR STATION DOOR STATION 1: ON, OFF AUTO RECORDING DOOR STATION 2: ON, OFF LWhen receiving calls from the door station, images are automatically recorded. DELETE ALL DELETE ALL PICTURES, BACK PICTURES LTo erase all recorded images, select “DELETE ALL PICTURES”. CONNECTED DEVICE SETTINGS DOOR STATION DOOR STATION 1: YES, AUTO, NO...
-
Page 24: Expanding The System
Door station* Main monitor station For VL-MV30BX users: The door station is optional (not included). You can connect up to 2 door openers to the main monitor station. If the main monitor station is connected to a PBX, one of the 2 door openers can be connected to the PBX and operated from the PBX extensions. - Page 25 Connecting to a PBX allows you to answer calls from the door station using additional machines (extensions). Please use only a Panasonic PBX (page 3). Note: ● If you answer a call from the door station with a PBX extension, the camera image taken by the door station will be displayed at the main monitor station.
-
Page 26: Help
Help Troubleshooting Monitor display Problem Cause & Solution Page The image of the subject is LAt night or when there is poor lighting in the doorway, ― displayed in black and white (or – the display will be shown in black and white (or bluish- bluish-purple), or the background purple). - Page 27 Help Conversation Problem Cause & Solution Page Sound cuts in/out or fades. LThe surroundings of the main monitor station or the door station are noisy. Try “Press-to-talk” mode. Your voice cannot be heard by is displayed, the “Press-to-talk” mode is activated. LWhen the outside visitor.
-
Page 28: Cleaning
Help Cleaning Clean the unit with a soft, dry cloth when cleaning. For excessive dirt, wipe the unit with a slightly damp cloth. Important: LWhen cleaning the unit, disconnect the plug from the power outlet. LDo not use anything containing alcohol, polish powder, powder soap, benzine, thinner, wax, petroleum, or boiling water. -
Page 29: General Information
General Information Specifi cations Main monitor station (VL-MV30BX) Power supply: 100 – 240 V AC, 50/60 Hz Current consumption: Standby: Approx. 0.04 A During operation: Approx. 0.22 A Dimensions: Approx. height 195 mm x width 148 mm x depth 36 mm... -
Page 30: Index
Index Index To fi nd the corresponding pages for functions displayed in the function list on the main monitor station, see “FUNCTION SETTINGS” in section “F” below. Accessory ............3 Microphone Adjusting the volume ........11, 18 Main monitor station ........6 Answering a call ..........10 Door station ............8 Auto image update ...........14... - Page 31 Notes...
- Page 32 For your future reference Date of purchase Serial number (found on the rear of the main monitor station) Dealer’s name and address Dealer’s telephone number Attach your sales receipt here.