Transferring Calls; Monitoring Camera Images - Panasonic VL-MN1000 Installation And Operating Instructions Manual

4. Talking and monitoring features

4.4 Transferring calls

While talking on a call, you can transfer the call to another
room monitor within your residence or to another
residence.
1
While talking on a call, tap "Forward".
2
Transferring within your residence
Enter "#" and the extension number (0–4), tap
outside of the on-screen keypad to close it, and then
tap "OK".
R Your room monitor calls the other room monitor.
Transferring to another residence
Enter the room number, tap outside of the on-screen
keypad to close it, and then tap "OK".
R Your room monitor calls the other residence.
3
Perform one of the following.
– Tap "Return" to return to the original call.
– Tap "Hang Up" after the other person answers.
The other person will be connected to the call,
and your room monitor will be disconnected
automatically.
Answering a transferred call
When another room monitor user transfers a call to your
room monitor, tap "Answer" to talk to the other room
monitor user. When the other user hangs up, you will be
connected to the call.
14

4.5 Monitoring camera images

You can monitor live camera images from lobby stations,
your own door stations, and other cameras installed in
the facility. While monitoring, you can see what is
happening at the camera, but no sound is heard.
1
From the home screen, tap "Talk".
2
Tap "Monitor" on the left side of the screen.
3
Select the desired tab.
– "Lobby/Door": Allows you to select a lobby
station or door station camera.
– "IP Camera": Allows you to select a standalone
camera installed elsewhere in the facility.
4
Select the desired camera.
5
When finished, tap
Calling the camera while monitoring
While monitoring a lobby station or door station, you can
call and talk to a visitor. To call, press M N.
Features available while monitoring camera images
– "Previous": Displays the image from the previous
camera in the list.
– "Next": Displays the image from the next camera in
the list.
*1
– "Record" : Records camera images and saves
them in your room monitor as a video file. When
recording, press "Stop" to stop recording.
*1
– "Snapshot" : Captures a still image (i.e., picture)
from the camera and saves it in your room monitor.
– "Return": Cancels monitoring.
– "Call Centre": Allows you to call a common area
phone or the facility staff office.
Note:
R Certain features may not be available depending on
system configuration.
R "Unlock" is not available when monitoring camera
images.
*1 Not available when monitoring a standalone camera
(IP camera).
.