Panasonic VL-MN1000 Installation And Operating Instructions Manual page 35

12.7.1 Installing by using mounting bracket
1
Determine the installation location of the room
monitor (Installation location (Page 34)).
2
Determine the installation location of the mounting
bracket.
107 mm
A Room monitor installation location
3
Open a hole in the wall for the wires and cables, and
then attach the mounting bracket to the wall using the
mounting screws.
A Hole in wall
B 72 mm
C 13 mm
D 58 mm
E 50 mm
F 11 mm
4
Connect the wires and cables to the room monitor.
R See 12.7.3 Connecting the wires and cables
(Page 37).
A
37 mm
B
C
D
A
E
F
5
Attach the room monitor to the mounting bracket by
first lining up the tab on the bottom of the bracket with
the groove on the room monitor.
6
Line up the tab on the top of the mounting bracket
with the groove on the room monitor, and push the
room monitor down until it is secure.
12. Installation
35