Middle Roof Panel 4 - Arrow VT1210-A Owner's Manual & Assembly Instructions

Step 21
BW32
1
Position middle roof panel over-
lapping rib of left corner roof panel.
Fasten overlap at center of roof panel
rib using a bolt and nut. Fasten to roof
beams as before using screws.
2
Cut the weather stripping tape
into 4 strips, each strip being about 2"
(5cm) long.
3
Cover the joint at the peak with
weather stripping tape. Unroll the tape
and press it down over the opening at
the ridge as you install each roof
panel. Do not cut the tape at this time.
4
Install a middle roof panel on the
left side of building. At the top roof
beam end of panels, fasten 1st roof
panel rib overlaps with a bolt and nut.
Press 2 strips over the bolt heads.
Save the other 2 strips for the next
overlap. Remember, the crimped rib
is always overlapped by wide rib of
adjacent panel.
32
Parts Needed For
Roof Panels 12x10
STEP
4
7828 Middle Roof Panel (2)
STEP
3
STEP
1