Download
Share
Print this page
Arrow VM1012-C1 Owner's Manual & Assembly Instructions
  1. Manuals
  2. Brands
  3. Arrow Manuals
  4. Outdoor Storage
  5. VM1012-C1
  6. Owner's manual & assembly instructions

Arrow VM1012-C1 Owner's Manual & Assembly Instructions

Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual & Assembly Instructions
SW01
Model No. VM1012-C1
714591207
BUILDING DIMENSIONS
*Approx.
Foundation
Size
Size
10' x 12'
121" x 143 1/4"
3,0m x 3,6m
307cm x 364cm
* Size rounded off to the nearest foot
Storage Area
(Roof Edge to Roof Edge)
Sq. Ft. Cu. Ft.
Width
115
729
123 1/4"
10,7m
2
20,6m
3
CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES
TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ
SAFETY INFORMATION PROVIDED IN THIS MANUAL
BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES
WHEN HANDLING METAL PARTS.
Exterior Dimensions
Depth
Height
145 3/4"
86"
313cm
370cm
218cm
Interior Dimensions
(Wall to Wall)
Width
Depth
Height
118 1/4" 140 1/2" 84 3/4" 55 1/2" 64 1/2"
300cm
357cm
215cm
Door
Opening
Width Height
141cm 164cm

Advertisement

loading

Related Manuals for Arrow VM1012-C1

Summary of Contents for Arrow VM1012-C1

  • Page 1 Owner's Manual & Assembly Instructions SW01 Model No. VM1012-C1 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ 714591207 SAFETY INFORMATION PROVIDED IN THIS MANUAL BEFORE BEGINNING CONSTRUCTION.
  • Page 2 BEFORE YOU BEGIN..Owner's Manual Before beginning construction, check local building codes regarding footings, location and other requirements. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly Instructions: Instructions are supplied in this manual and contain all appropriate information for your building model.
  • Page 3 PLAN AHEAD..Watch the Weather: Be sure the day you select to install your building is dry and calm. Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Teamwork: Whenever possible, two or more people should work together to assemble your building.
  • Page 4 SAFETY FIRST..Safety precautions are important to follow throughout the construction of your building. •Care must be taken when handling various •Practice caution with the tools being used in the pieces of your building since some contain assembly of this building. Be familiar with the sharp edges.
  • Page 5 CARE & MAINTENANCE..A5 Web Finish: For long lasting finish, periodically clean and wax the exterior surface. Touch- up scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Roof: Keep roof clear of leaves and snow with long handled, soft-bristled broom.
  • Page 6 ACCESSORIES..A6 WEB ROOF STRENGTHENING FLOOR FRAME KITS (heavy snow load) KITS Extra roof beams and gable braces designed for added protection against heavy snow accumulation. Increases the strength of your roof by 50%. ANCHOR KITS Model No. AK4 MODELS FB47410, FB5465, FB106-A Anchor Kit contains heavy-duty steel FB109-A and FB1014-A augers, 60' (18m) of steel cable and 4 cable...
  • Page 7 THIS PAGE LEFT BLANK INTENTIONALLY...
  • Page 8 THIS PAGE LEFT BLANK INTENTIONALLY...
  • Page 9 Foundation The Foundation For Your Building OPTION 1: ARROW FLOOR FRAME KIT: (Order No. FB1014-A or 68387-A) Arrow has the best base for your building in this simple kit. It keeps stored items above the ground . This kit should be used with one of the following: A.
  • Page 10 Anchoring Anchoring Down The Building It is important that the entire floor frame be anchored after the building is erected. Below are recommended ways of anchoring. Anchoring into Wood/Post: Arrow Anchoring Kit: (Model No. AK4 or 60298) Use 1/4" Wood Screws. There are 1/4" (0,63cm) dia. Recommended for use with any suggested base.
  • Page 11 Hardware SW11 Remove from bag of screws and save for the last step 65900A 65103 #10Bx1/2" Black Screw (8) 65923 65004 #8-32 Hex Nut (139) #8-32x3/8" Bolt (139) #8Ax5/16" Screw (382) (Packed with Screws) 66183 67468 6228 Roof Trim Cap Peak Cap (2) 66769 Track Support (2)

  • Page 12: Table Of Contents

    Parts List SW12 Assembly Part Part Quantity Check Key No. Number Description In Carton List 3719 Door Handle Brace 5290 Front Siding (6 board) 5291 Front Siding (3 board) 5306 Rear Siding (6 board) 5307 Rear Siding (3 board) 5335 Side Siding (3 board) 5336 Side Siding (6 board)
  • Page 13 Assembly by Key No. SW13...

  • Page 14: Side Floor Frame

    ● ● ● ● ● 8934 Ramp (1) ● Parts Needed For ● ● ● ● ● ● 9367 Front Floor Frame (2) Step 1 ● ● ● ● ● 8936 Rear Floor Frame (2) Floor Frame Assemblies ● ● ● ● ● 10392 Side Floor Frame (4) SV14 The front floor frame is made up of three pieces.

  • Page 15: Side Wall Angle

    ● Parts Needed For ● ● ● ● ● ● 5986 Rear Wall Angle (2) Step 2 ● ● ● ● ● 10394 Side Wall Angle (4) Frame Assemblies SW15 The main frame pieces reinforce the walls. These piece will later be in- stalled at the top edge of the side walls and the rear wall.

  • Page 16: Roof Panel

    ● Parts Needed For ● Step 3 ● ● ● ● ● 10397 Roof Beam (8) Roof Beam Assemblies SV16 The roof beams join the two gables and support the roof panels. The main roof beam is made up of four pieces 10397 overlapped back to back at the cen- ter.
  • Page 17 ● Parts Needed For ● ● ● ● ● ● 6403 Door Track Splice (1) Step 4 ● ● ● ● ● 9366 Door Track (2) Door Track Assembly NOTE: Door Track Splice (painted part) The door track assembly supports the sliding doors and reinforces the front wall.
  • Page 18 ● ● ● ● ● Front Floor Assembly (1) ● Parts Needed For ● Step 5 ● ● ● ● ● Side Floor Assembly (2) Floor Frame ● ● ● ● ● Rear Floor Assembly (1) SW18 RIGHT REAR 10392 STEP Place the floor frame pieces that 8936...
  • Page 19 ● ● ● ● ● 9196 Right Corner Post (2) ● Parts Needed For ● ● ● ● ● ● 9197 Left Corner Post (2) Step 6 ● ● ● ● ● Door Track Assembly (1) Posts/Top Frames ● ● ● ● ● Rear Wall Angle Assembly (1) ●...
  • Page 20 ● Parts Needed For ● ● ● ● ● ● 9195 Splice Post (1) Step 7 ● ● ● ● ● 9198 Side Splice Post (2) Splice Post/Door Jamb ● ● ● ● ● 9194 Door Jamb (2) SW20 STEP The door jambs reinforce the door opening and provide an attractive ANGLED END OF...
  • Page 21 ● Parts Needed For ● Step 8 ● ● ● ● ● 9199 Siding Stud (10) Studs SW21 The studs provide a surface for at- taching the siding panels. Following dimensions, measur- ing from the ends of angles, place a stud between each corner and splice post at the rear and two on sides of building.

  • Page 22: Side Siding (5 Board)

    ● Parts Needed For ● ● ● ● ● ● 6287 Side Siding (5 board) (4) Step 9 ● ● ● ● ● 5335 Side Siding (3 board) (4) Side Siding ● ● ● ● ● 5336 Side Siding (6 board) (4) SW22 Each screw in the wall requires a washer.
  • Page 23 ● Parts Needed For ● ● ● ● ● ● 8736 Rear Siding (5 board) (2) Step 10 ● ● ● ● ● 5307 Rear Siding (3 board) (2) Rear Siding ● ● ● ● ● 5306 Rear Siding (6 board) (2) SW23 Slide rear siding (5 board) into channel of corner and splice posts...
  • Page 24 ● Parts Needed For ● ● ● ● ● ● 8737 Front Siding (5 board) (2) Step 11 ● ● ● ● ● 5291 Front Siding (3 board) (2) Front Siding ● ● ● ● ● 5290 Front Siding (6 board) (2) SW24 Slide front siding (5 board) into channel of corner post and door jamb.
  • Page 25 ● Parts Needed For ● ● ● ● ● ● 8576 Right Gable (2) Step 12 ● ● ● ● ● 8577 Left Gable (2) Gable Assemblies ● ● ● ● ● 6635 Roof Beam Bracket (4) SW25 The gables go on top of the front and rear walls to support the roof beams.
  • Page 26 ● ● ● ● ● Left Gable Assemblies (2) ● Parts Needed For ● ● ● ● ● ● Right Gable Assemblies (2) Step 13 ● ● ● ● ● 9009 Gable Brace (2) Gables/Braces ● ● ● ● ● 6228 Track Supports (2) SW26 Lift and fasten a right and left gable, under angle at corner, to the...
  • Page 27 ● Parts Needed For ● ● ● ● ● ● Main Roof Beam Assembly (1) Step 14 ● ● ● ● ● Single Roof Beam Brace Assembly (2) Roof Beam/Braces ● ● ● ● ● 9204 Roof Beam Brace (2) SW27 Wrap the weather stripping tape STEP...
  • Page 28 ● Parts Needed For ● Step 15 ● ● ● ● ● 9086 Right Roof Panel (1) Right Roof Panel SW28 Installing the roof panels is best done 9087 9086 with a step ladder. Begin installing roof panels at the back right corner of the building.
  • Page 29 ● Parts Needed For ● ● ● ● ● ● 9087 Left Roof Panel (1) Step 16 ● ● ● ● ● 7743 Roof Panel (2) Roof Assembly ● ● ● ● ● 6869 Ridge Cap (1) SW29 Install a left roof panel at the left Screws To Roof Beam rear corner of the roof.
  • Page 30 ● Parts Needed For ● ● ● ● ● ● 7743 Roof Panel (2) Step 17 ● ● ● ● ● 6868 Ridge Cap (1) Roof Assembly SW30 Install two roof panels as you unroll the weather stripping tape, and press it down, install the second ridge cap 6868 overlapping the first ridge cap.
  • Page 31 ● ● ● ● ● 7743 Roof Panel (2) ● Parts Needed For ● ● ● ● ● ● 9087 Left Roof Panel (1) Step 18 ● ● ● ● ● 6869 Ridge Cap (1) Roof Assembly ● ● ● ● ● 9086 Right Roof Panel (1) SW31 Install two roof panels, left roof panel, ridge cap 6869 and right roof...
  • Page 32 ● Parts Needed For ● Step 19 ● ● ● ● ● 6015 Side Roof Trim (4) Roof Trim ● ● ● ● ● 6014 Side Roof Trim (2) SW32 Attach the side roof trim pieces to the lower end of the roof panels on each side of the building using screws at each panel overlap.
  • Page 33 ● ● ● ● ● 3719 Door Handle Brace (2) ● Parts Needed For ● ● ● ● ● ● 10483 Right and Left Doors (2) Step 20 ● ● ● ● ● 10497 Horizontal Door Brace (4) Door Assembly ●...
  • Page 34 ● Parts Needed For ● ● ● ● ● ● Right Door Assembly (1) Step 21 ● ● ● ● ● Left Door Assembly (1) Door Installation & Adjustment SW34 Horizontal Door Brace Gable Door Track Door Slide From inside the building, put the bottom of the right door assembly (on your left when you are inside the STEP...
  • Page 35 VM1012-C1 SW36 SOME FACTS ABOUT RUST 1. Avoid nicking or scraping the coating surface, Rusting is a natural oxidizing process that occurs inside and out. when bare metal is exposed to moisture. Problem areas include screw holes, unfinished edges, or 2.