Disk Clone & Wipe - Thecus N2810 Series User Manual

To unmount the image file, select the mounted ISO file from list then click
Unmount to eliminate a mounted ISO file.
B. Using ISO
The mounted ISO image file will have a folder created from input "Mount Folder
Name" and be located in the share folder same as selected ISO file. Please refer
the screen shot below and folder "myisofile" can be found.
Disk Clone & Wipe
From the Control Panel, the Disk Clone and Wipe feature is located under
"Storage".
Select the Disk Clone and Wipe function and the unused internal and installed
USB disks will list as shown below.
Disk Clone:
Unused Disks and plugin USB disks that have been installed on this storage
device can utilize the disk clone function. If disks have already been configured in
a RAID volume or as a spare disk, they cannot perform disk clone.
To start disk clone, select the source disk from the Source Disk drop down menu
and target a disk from the dialog box as seen below. Carry on to press "Apply,"
then the task will start after confirmation. It may take a few hours depending on
the size of the disk.
Please be sure the source disk is equal to or smaller than the target disk.
112