Summary of Contents for Thecus IP Storage Appliance N4100PRO
Page 2
Hard disk drive installation, Network cable connection. Connect Ethernet cable to the WAN port on N4100PRO and connect the other end to your switch/hub/router. Installation du disque dur, Branchement du Démarrage du navigateurcâble réseau Branchez le câble Ethernet au port WAN sur le N4100PRO et branchez l’autre extrémité...
Page 3
Start web user interface After N4100 boots up, the default IP address is 192.168.1.100. The default administrator’s username/password is admin/admin. Démarrage de l'interface utilisateur Web Après de démarrage du N4100 Les noms d’utilisateur et mot de passe administrateur par défaut sont admin/admin. Starten des WEB Benutzer-Interfaces Nachdem die N4100 Die vorgegebenen Administrator Anmeldedaten für Username/Passwort sind admin/admin.
Page 4
Complete the Setup Wizard A. Device Discovery: The Setup Wizard will detect all Thecus NAS devices on the network. Démarrage de l'interface utilisateur Web A. Recherche de périphérique: Le guide d’installation détectera automatiquement tous les périphériques NAS Thecus sur votre réseau. Fertigstellen der Installation A.
Page 5
C. Network Setting Name your N4100 system and configure the network. You can choose either fixed IP or DHCP. C. Configuration réseau Attribuez un nom à votre système N4100 réseau. Vous pouvez choisir entre une IP fixe ou DHCP. C. Netzwerkeinstell e N4100 Adresse.
Need help?
Do you have a question about the IP Storage Appliance N4100PRO and is the answer not in the manual?
Questions and answers