Thecus N2810 Series User Manual page 88

8. Specify a stripe size — 64K is the default setting.
9. Specify size for "Bytes per inode" if ext3/ext4 has selected. The default
value is Auto and it has no need to change for general use.
10. Select the file system you would like to have for this RAID volume. The
selection is available from ext3, XFS, ext4 and btrfs.
NOTE
11. Press Create Finished to build the RAID storage volume.
NOTE
WARNING
RAID Level
You can set the storage volume as JBOD, RAID 0, RAID 1, RAID 5, RAID 6,
RAID 10, RAID 50 and RAID 60 (Depend on Model and how many disks
has been installed).
Level
Model
N2810 series
N4810 series
N4910U series
N5810 series
N12850 series
N12910/N12910SAS
N16850 series
N16910SAS
Single volume size supported:
ext3  8TB
XFS  48TB
ext4  36TB
btrfs  16EB
Building a RAID volume may be time consuming, depending on the size
of hard drives and RAID mode. In general, if the RAID volume building
process is up to "RAID Building", then the data volume is accessible.
Creating RAID destroys all data in the current RAID volume. The data will
be unrecoverable.
JBOD RAID 0 RAID 1
  
  
  
  
  
  
  
  
RAID 5 RAID 6 RAID 10
 
 
 
 
 
 
 
88
RAID 50 RAID 60



  
  
  
  