Thecus N2810 Series User Manual page 146

From "iSCSI" tab click on Add button and the setting screen will appear as below.
Follow the steps to complete the setting.
1. Fill in the remote target IP (Destination) and port (need to be changed only if
this port is already in use). If encryption is required then enable it. Please
make sure the associated target server also has encryption enabled.
click on "Get Server Folder" to get remote target server folder list to choose
destination.
2. System will list available iSCSI volume, choose source iSCSI volume to
backup. The multiple iSCSI volume selection is allowed.
146
And