Thecus N2810 Series User Manual page 121

Port
Share Folder
Folder Permission
WebDAV
The WebDAV is an extended protocol of http(s) which allows remote access to
your NAS system.
To begin using WebDAV and WebDAV SSL, simply click enable and provide the
port number. The default port number is 9800, under normal circumstances this
will not need to be changed.
WebDAV Configuration
Item
WebDAV Service
WebDAV SSL Service
Browser View
Apply
Specifies the port number of an incoming connection on a non-
standard port.
Select the file stored folder, it cannot be empty.
Select the folder permission
Description
Press the Enable button to activate WebDAV service and specify
the port number if it needs to change from the default value.
P.S. Port number is limited to greater than 1024 and less than
65536
Press the Enable button to activate WebDAV SSL service and
specify the port number if it needs to be changed from the default
value.
P.S. The ort number is limited to greater than 1024 and less than
65536
Press the Enable button and viewing the share folder list through
the browser will be allowed
Click "Apply" to confirm the changes.
121