Client Management - Thecus N2810 Series User Manual

Below is a description of each item:
VPN Server
Item
Enable VPN Server
VPN Client IP Pool
VPN Server remote IP
Authentication
IKE Authentication
Pre-shared key
Network Interface
Apply

Client Management

For the VPN client access control, simply click on "Client Management" tab. It will
list all the users on this system and default "not allowed" for VPN connection.
Click on associated user and Edit button to change the accessibility.
Connection List
To get the on-line connection list, click on the "Connection List" tab. It will display
connected users with associated connection information.
Description
Check to enable VPN server service
Input the IP range for client IP.
Input the IP for the VPN server for VPN client connection
The default is PAP, can't change.
Internet Key Exchange for authentication while connection is
made.
Input the key for connection authentication in between VPN
client and server.
Select the NIC interface to use for VPN server
Click "Apply" to confirm the changes.
126