Thecus N2810 Series User Manual page 95

For more technical S.M.A.R.T. information, please click on Detail.
You may also like to
the SMART test. The result is only for reference and the system will not take any
action from its results.
There are "Fast Test" or 'Full test" can be choose from.
Bad Block Scan:
1. Select a disk from the list.
2. Click on Start Scan Block button to perform.
3. Click again to stop bad block scanning.
depending on manufacturer) in power-on state.
perform a disk SMART test, simply click
95
"Self Test" to start