Thecus N2810 Series User Manual page 109

In general, clicking on associated stack target, if the attached stack target device
has been used by another Thecus NAS as stack target volume, then the status
Mounted will be displayed and system will recognize it straight away and display
its capacity. Otherwise, the Connected will be displayed in Status. Now click on
associated stack target and you will see the File System Format tab appear.
Click on it to proceed with formatting.
After the format is completed, the stack target volume will be created
successfully. You will see the volume's capacity and status in the NAS Stacking
List screen.
C. Edit a Stack Target
To make any changes to a stack target, select the corresponding stack target
then click Edit, and the system will bring up the following dialogue window:
109