NOTE
To change the state of enabled Disk-Security disk, click on associated disk (MUST
in unused) and the available function tab will appear.
Other than Set Password as mentioned above, the Disk Security can be disabled
by clicking on 'Disable Disk Security" and the disk can be erased by clicking on
"Erase Disk" if correct password has been inputted.
iSCSI
You may specify the space allocated for iSCSI. See the table below to view the
allowed iSCSI target number per system:
Model
Allowed iSCSI
The disk to enable Disk-Security setting is
only available while disk is unused
The USB disk which has contained password
need to plug-in on system once associated
disk with Disk-Security enabled is part of
RAID member during system power on.
Without enable Disk-Security on installed
disk, it is just like normal disk
N2810 series
N4810 series
25
N4910U series
N5810
N5810PRO
N12850L
N12850RU
N12910
50
98
N12850
N12910sas
N16850
N16910sas
200