Thecus N2810 Series User Manual page 108

The Browseable setting is the same method used for setting a system share
folder. It designates whether or not this folder will be visible through web disk.
You may refer to the figure below for reference when Yes and No are selected.
The Public setting will be set the same way as the setting for the system share
folder associated with the ACL permission is. The sample above of Device Folder
"Kendo02" can be found from share folder list.
Click Apply to save your changes.
B. Activate a Stack Target
After your settings have been applied, the system will bring you back to the NAS
Stacking List window as shown below. There is one stack target device that has
been attached into this stack master.
With this newly attached stack target device, you will see the information
displayed .
108