Displaying And Maintaining The Private Vlan - HP FlexFabric 12900 Series Configuration Manual

Step
16. Associate the primary VLAN
with the specified secondary
VLANs.
17. Return to system view.
18. (Optional.) Configure Layer 3
communication between the
specified secondary VLANs.

Displaying and maintaining the private VLAN

Execute display commands in any view.
Task
Display information about primary VLANs and the
secondary VLANs associated with each primary VLAN.
Command
private-vlan secondary vlan-id-list
quit
a. Enter VLAN interface view
of the primary VLAN
interface:
interface vlan-interface
vlan-id
b. Enable Layer 3
communication between
secondary VLANs that are
associated with the
primary VLAN:
private-vlan secondary
vlan-id-list
c. Assign an IPv4 address to
the primary VLAN
interface:
ip address ip-address
{ mask-length | mask }
[ sub ]
d. Assign an IPv6 address to
the primary VLAN
interface:
ipv6 address
{ ipv6-address
prefix-length |
ipv6-address/prefix-lengt
h }
e. Enable local proxy ARP:
local-proxy-arp enable
f. Enable local proxy ND:
local-proxy-nd enable
Command
display private-vlan [ primary-vlan-id ]
137
Remarks
By default, a primary VLAN is not
associated with any secondary
VLAN.
N/A
Use substeps a, b, c, and e for
devices that run IPv4 protocols.
Use substeps a, b, d, and f for
devices that run IPv6 protocols.
By default:
•
Secondary VLANs cannot
communicate with each other
at Layer 3.
•
No IP address is configured for
a VLAN interface.
•
Local proxy ARP and local
proxy ND are disabled.