HP FlexFabric 12900 Series Configuration Manual page 151

Verifying the configuration
# Display primary VLAN configurations on Device B. The following output uses primary VLAN 5 as an
example.
[DeviceB] display private-vlan 5
Primary VLAN ID: 5
Secondary VLAN ID: 2-3
VLAN ID: 5
VLAN type: Static
Private VLAN type: Primary
Route interface: Not configured
Description: VLAN 0005
Name: VLAN 0005
Tagged
Ten-GigabitEthernet1/0/1
Untagged ports:
Ten-GigabitEthernet1/0/2
VLAN ID: 2
VLAN type: Static
Private VLAN type: Secondary
Route interface: Not configured
Description: VLAN 0002
Name: VLAN 0002
Tagged
Ten-GigabitEthernet1/0/1
Untagged ports:
Ten-GigabitEthernet1/0/2
VLAN ID: 3
VLAN type: Static
Private VLAN type: Secondary
Route interface: Not configured
Description: VLAN 0003
Name: VLAN 0003
Tagged
Ten-GigabitEthernet1/0/1
Untagged ports:
Ten-GigabitEthernet1/0/3
The output shows that:
The trunk promiscuous port Ten-GigabitEthernet 1/0/1 is a tagged member of primary VLAN 5
•
and secondary VLANs 2 and 3.
• The host port Ten-GigabitEthernet 1/0/2 is an untagged member of primary VLAN 5 and
secondary VLAN 2.
The host port Ten-GigabitEthernet 1/0/3 is an untagged member of primary VLAN 5 and
•
secondary VLAN 3.
ports:
ports:
ports:
Ten-GigabitEthernet1/0/3
143