Cisco Vcs Provisioning - Cisco CTS-SX10-K9 Getting Started Manual

Cisco TelePresence SX10 Quick Set
SX10 Quick Set

Cisco VCS provisioning

When using the Cisco VCS (Video Communication Server)
provisioning, a template containing all the settings that can be
provisioned must be uploaded to Cisco TMS (TelePresence
Management System). This is called the Cisco TMS
provisioning configuration template.
All the advanced settings for your video system are included
in this template. All settings except SystemUnit Name
Profile [1..1] URI can be automatically provisioned to the video
system.
The system settings are described in the administrator guide
for your video system. Examples showing either the default
value or an example value are included.
Read the Cisco TMS Provisioning Deployment Guide to find
out how to upload the file to Cisco TMS, and how to set the
desired values for the parameters to be provisioned. If not set
by Cisco TMS, the default values are used.
D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014.
Contents Introduction
Downloading the provisioning configuration
template
You can download the templates here:
SX Series:SX Series Release Notes
For each software release there is one provisioning
and SIP
configuration template for every video system model. Make
sure to download the correct file.
Configuration
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
23
Getting Started Guide
Appendices Appendices Contact