Provisioning Set-Up - Cisco CTS-SX10-K9 Getting Started Manual

Cisco TelePresence SX10 Quick Set
SX10 Quick Set

Provisioning set-up

(When using a provisioning system)
Start the Setup assistant
Navigate to the user name in the upper left corner, and select
Settings. Select Setup assistant. Navigate to Provisioning.
NOTE: When you start up the SX10 for the first time, the Setup
assistant starts automatically.
Choose provisioning infrastructure
Choose one of the following supported provisioning systems:
• Cisco VCS (Video Communication Server)
• Cisco UCM (Unified Communications Manager)
Cisco VCS
Contact your VCS provider to get the information needed.
Have a look at the Cisco VCS provisioning
information on VCS provisioning.
Cisco UCM
Contact your UCM provider to get the information needed.*
You can find more details about setting up Cisco UCM
provisioning in the Administering TC endpoints on CUCM
guide
* The DHCP server can be set up to provide the External Manager address
automatically (DHCP Option 150). Any input set up here overrides the setting
provided by DHCP.
Back to task overview
D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014.
Contents Introduction
appendix for more
Configuration Configuration
CUCM
Enter IP address or DNS name, and select ⎷ to
confirm the change. Select Apply to save.
VCS
1. Enter IP address or DNS name of the Cisco
VCS and select ⎷ to confirm the change.
2. Enter the Username, and Password, if
required, for authenticating the video system
with the provisioning server. Select ⎷ to
confirm the change
3. Enter SIP Domain and select ⎷ to confirm the
change.
4. Select Apply to confirm the changes.
9
Getting Started Guide
Appendices
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
Contact